0s autopkgtest [18:06:26]: starting date and time: 2024-11-13 18:06:26+0000 0s autopkgtest [18:06:26]: git checkout: 6f3be7a8 Fix armhf LXD image generation for plucky 0s autopkgtest [18:06:26]: host juju-7f2275-prod-proposed-migration-environment-9; command line: /home/ubuntu/autopkgtest/runner/autopkgtest --output-dir /tmp/autopkgtest-work.uwbvrxz6/out --timeout-copy=6000 --setup-commands 'ln -s /dev/null /etc/systemd/system/bluetooth.service; printf "http_proxy=http://squid.internal:3128\nhttps_proxy=http://squid.internal:3128\nno_proxy=127.0.0.1,127.0.1.1,login.ubuntu.com,localhost,localdomain,novalocal,internal,archive.ubuntu.com,ports.ubuntu.com,security.ubuntu.com,ddebs.ubuntu.com,changelogs.ubuntu.com,keyserver.ubuntu.com,launchpadlibrarian.net,launchpadcontent.net,launchpad.net,10.24.0.0/24,keystone.ps5.canonical.com,objectstorage.prodstack5.canonical.com\n" >> /etc/environment' --apt-pocket=proposed=src:python3-defaults,src:python3-stdlib-extensions --apt-upgrade mdp --timeout-short=300 --timeout-copy=20000 --timeout-build=20000 '--env=ADT_TEST_TRIGGERS=python3-defaults/3.12.7-1 python3-stdlib-extensions/3.12.7-1' -- lxd -r lxd-armhf-10.145.243.232 lxd-armhf-10.145.243.232:autopkgtest/ubuntu/plucky/armhf 52s autopkgtest [18:07:18]: testbed dpkg architecture: armhf 54s autopkgtest [18:07:20]: testbed apt version: 2.9.8 54s autopkgtest [18:07:20]: @@@@@@@@@@@@@@@@@@@@ test bed setup 62s Get:1 http://ftpmaster.internal/ubuntu plucky-proposed InRelease [73.9 kB] 62s Get:2 http://ftpmaster.internal/ubuntu plucky-proposed/main Sources [104 kB] 62s Get:3 http://ftpmaster.internal/ubuntu plucky-proposed/universe Sources [971 kB] 62s Get:4 http://ftpmaster.internal/ubuntu plucky-proposed/multiverse Sources [17.2 kB] 62s Get:5 http://ftpmaster.internal/ubuntu plucky-proposed/restricted Sources [7016 B] 62s Get:6 http://ftpmaster.internal/ubuntu plucky-proposed/main armhf Packages [106 kB] 62s Get:7 http://ftpmaster.internal/ubuntu plucky-proposed/universe armhf Packages [647 kB] 62s Get:8 http://ftpmaster.internal/ubuntu plucky-proposed/multiverse armhf Packages [17.2 kB] 63s Fetched 1943 kB in 1s (2110 kB/s) 63s Reading package lists... 81s tee: /proc/self/fd/2: Permission denied 106s Hit:1 http://ftpmaster.internal/ubuntu plucky-proposed InRelease 106s Hit:2 http://ftpmaster.internal/ubuntu plucky InRelease 106s Hit:3 http://ftpmaster.internal/ubuntu plucky-updates InRelease 106s Hit:4 http://ftpmaster.internal/ubuntu plucky-security InRelease 107s Reading package lists... 107s Reading package lists... 107s Building dependency tree... 107s Reading state information... 108s Calculating upgrade... 108s The following NEW packages will be installed: 108s python3.13-gdbm 108s The following packages will be upgraded: 108s libgnutls30t64 libjson-glib-1.0-0 libjson-glib-1.0-common libpython3-stdlib 108s libutempter0 python3 python3-gdbm python3-minimal 108s 8 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 108s Need to get 1131 kB of archives. 108s After this operation, 95.2 kB of additional disk space will be used. 108s Get:1 http://ftpmaster.internal/ubuntu plucky-proposed/main armhf python3-minimal armhf 3.12.7-1 [27.4 kB] 108s Get:2 http://ftpmaster.internal/ubuntu plucky-proposed/main armhf python3 armhf 3.12.7-1 [24.0 kB] 108s Get:3 http://ftpmaster.internal/ubuntu plucky-proposed/main armhf libpython3-stdlib armhf 3.12.7-1 [10.0 kB] 108s Get:4 http://ftpmaster.internal/ubuntu plucky/main armhf libgnutls30t64 armhf 3.8.8-2ubuntu1 [955 kB] 109s Get:5 http://ftpmaster.internal/ubuntu plucky/main armhf python3.13-gdbm armhf 3.13.0-2 [29.5 kB] 109s Get:6 http://ftpmaster.internal/ubuntu plucky-proposed/main armhf python3-gdbm armhf 3.12.7-1 [8642 B] 109s Get:7 http://ftpmaster.internal/ubuntu plucky/main armhf libjson-glib-1.0-common all 1.10.0+ds-3 [5586 B] 109s Get:8 http://ftpmaster.internal/ubuntu plucky/main armhf libjson-glib-1.0-0 armhf 1.10.0+ds-3 [61.7 kB] 109s Get:9 http://ftpmaster.internal/ubuntu plucky/main armhf libutempter0 armhf 1.2.1-4 [9062 B] 109s Fetched 1131 kB in 1s (2046 kB/s) 109s (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 59559 files and directories currently installed.) 109s Preparing to unpack .../python3-minimal_3.12.7-1_armhf.deb ... 109s Unpacking python3-minimal (3.12.7-1) over (3.12.6-0ubuntu1) ... 109s Setting up python3-minimal (3.12.7-1) ... 109s (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 59559 files and directories currently installed.) 109s Preparing to unpack .../python3_3.12.7-1_armhf.deb ... 109s Unpacking python3 (3.12.7-1) over (3.12.6-0ubuntu1) ... 109s Preparing to unpack .../libpython3-stdlib_3.12.7-1_armhf.deb ... 109s Unpacking libpython3-stdlib:armhf (3.12.7-1) over (3.12.6-0ubuntu1) ... 109s Preparing to unpack .../libgnutls30t64_3.8.8-2ubuntu1_armhf.deb ... 109s Unpacking libgnutls30t64:armhf (3.8.8-2ubuntu1) over (3.8.6-2ubuntu1) ... 110s Setting up libgnutls30t64:armhf (3.8.8-2ubuntu1) ... 110s Selecting previously unselected package python3.13-gdbm. 110s (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 59559 files and directories currently installed.) 110s Preparing to unpack .../python3.13-gdbm_3.13.0-2_armhf.deb ... 110s Unpacking python3.13-gdbm (3.13.0-2) ... 110s Preparing to unpack .../python3-gdbm_3.12.7-1_armhf.deb ... 110s Unpacking python3-gdbm:armhf (3.12.7-1) over (3.12.6-1ubuntu1) ... 110s Preparing to unpack .../libjson-glib-1.0-common_1.10.0+ds-3_all.deb ... 110s Unpacking libjson-glib-1.0-common (1.10.0+ds-3) over (1.10.0+ds-2) ... 110s Preparing to unpack .../libjson-glib-1.0-0_1.10.0+ds-3_armhf.deb ... 110s Unpacking libjson-glib-1.0-0:armhf (1.10.0+ds-3) over (1.10.0+ds-2) ... 110s Preparing to unpack .../libutempter0_1.2.1-4_armhf.deb ... 110s Unpacking libutempter0:armhf (1.2.1-4) over (1.2.1-3build1) ... 110s Setting up libutempter0:armhf (1.2.1-4) ... 110s Setting up libjson-glib-1.0-common (1.10.0+ds-3) ... 110s Setting up python3.13-gdbm (3.13.0-2) ... 110s Setting up libpython3-stdlib:armhf (3.12.7-1) ... 110s Setting up python3 (3.12.7-1) ... 110s Setting up libjson-glib-1.0-0:armhf (1.10.0+ds-3) ... 110s Setting up python3-gdbm:armhf (3.12.7-1) ... 110s Processing triggers for man-db (2.12.1-3) ... 110s Processing triggers for libc-bin (2.40-1ubuntu3) ... 111s Reading package lists... 111s Building dependency tree... 111s Reading state information... 112s 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 114s autopkgtest [18:08:20]: rebooting testbed after setup commands that affected boot 185s autopkgtest [18:09:31]: testbed running kernel: Linux 6.8.0-48-generic #48~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Mon Oct 7 11:49:53 UTC 2 213s autopkgtest [18:09:59]: @@@@@@@@@@@@@@@@@@@@ apt-source mdp 224s Get:1 http://ftpmaster.internal/ubuntu plucky/universe mdp 3.6-8 (dsc) [2324 B] 224s Get:2 http://ftpmaster.internal/ubuntu plucky/universe mdp 3.6-8 (tar) [421 kB] 224s Get:3 http://ftpmaster.internal/ubuntu plucky/universe mdp 3.6-8 (diff) [9956 B] 224s gpgv: Signature made Thu Apr 25 06:27:56 2024 UTC 224s gpgv: using RSA key 9B03EBB98300DF97C2B123BFCC8C6BDD1403F4CA 224s gpgv: issuer "roehling@debian.org" 224s gpgv: Can't check signature: No public key 224s dpkg-source: warning: cannot verify inline signature for ./mdp_3.6-8.dsc: no acceptable signature found 224s autopkgtest [18:10:10]: testing package mdp version 3.6-8 228s run-unit-test SKIP Test lists explicitly supported architectures, but the current architecture armhf isn't listed. 228s autopkgtest [18:10:14]: build not needed 232s run-unit-test SKIP Test lists explicitly supported architectures, but the current architecture armhf isn't listed. 232s autopkgtest [18:10:18]: test autodep8-python3: preparing testbed 242s Reading package lists... 243s Building dependency tree... 243s Reading state information... 243s Starting pkgProblemResolver with broken count: 0 243s Starting 2 pkgProblemResolver with broken count: 0 243s Done 244s The following additional packages will be installed: 244s libblas3 libgfortran5 liblapack3 libpython3.13-minimal libpython3.13-stdlib 244s python3-all python3-mdp python3-numpy python3.13 python3.13-minimal 244s Suggested packages: 244s gcc gfortran python-numpy-doc python3-dev python3-pytest python3.13-venv 244s python3.13-doc binfmt-support 244s Recommended packages: 244s python3-pytest python3-scipy python3-joblib python3-sklearn python3-libsvm 244s The following NEW packages will be installed: 244s autopkgtest-satdep libblas3 libgfortran5 liblapack3 libpython3.13-minimal 244s libpython3.13-stdlib python3-all python3-mdp python3-numpy python3.13 244s python3.13-minimal 244s 0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. 244s Need to get 11.8 MB/11.8 MB of archives. 244s After this operation, 42.8 MB of additional disk space will be used. 244s Get:1 /tmp/autopkgtest.3jf1W6/1-autopkgtest-satdep.deb autopkgtest-satdep armhf 0 [716 B] 244s Get:2 http://ftpmaster.internal/ubuntu plucky/main armhf libpython3.13-minimal armhf 3.13.0-2 [866 kB] 245s Get:3 http://ftpmaster.internal/ubuntu plucky/main armhf python3.13-minimal armhf 3.13.0-2 [1854 kB] 246s Get:4 http://ftpmaster.internal/ubuntu plucky/main armhf libblas3 armhf 3.12.0-3build2 [126 kB] 246s Get:5 http://ftpmaster.internal/ubuntu plucky/main armhf libgfortran5 armhf 14.2.0-8ubuntu1 [311 kB] 246s Get:6 http://ftpmaster.internal/ubuntu plucky/main armhf liblapack3 armhf 3.12.0-3build2 [2086 kB] 247s Get:7 http://ftpmaster.internal/ubuntu plucky/main armhf libpython3.13-stdlib armhf 3.13.0-2 [1972 kB] 247s Get:8 http://ftpmaster.internal/ubuntu plucky/main armhf python3.13 armhf 3.13.0-2 [719 kB] 247s Get:9 http://ftpmaster.internal/ubuntu plucky-proposed/main armhf python3-all armhf 3.12.7-1 [890 B] 247s Get:10 http://ftpmaster.internal/ubuntu plucky/main armhf python3-numpy armhf 1:1.26.4+ds-11build1 [3570 kB] 248s Get:11 http://ftpmaster.internal/ubuntu plucky/universe armhf python3-mdp all 3.6-8 [296 kB] 248s Fetched 11.8 MB in 4s (2955 kB/s) 248s Selecting previously unselected package libpython3.13-minimal:armhf. 248s (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 59566 files and directories currently installed.) 248s Preparing to unpack .../00-libpython3.13-minimal_3.13.0-2_armhf.deb ... 248s Unpacking libpython3.13-minimal:armhf (3.13.0-2) ... 248s Selecting previously unselected package python3.13-minimal. 248s Preparing to unpack .../01-python3.13-minimal_3.13.0-2_armhf.deb ... 248s Unpacking python3.13-minimal (3.13.0-2) ... 248s Selecting previously unselected package libblas3:armhf. 248s Preparing to unpack .../02-libblas3_3.12.0-3build2_armhf.deb ... 248s Unpacking libblas3:armhf (3.12.0-3build2) ... 248s Selecting previously unselected package libgfortran5:armhf. 248s Preparing to unpack .../03-libgfortran5_14.2.0-8ubuntu1_armhf.deb ... 248s Unpacking libgfortran5:armhf (14.2.0-8ubuntu1) ... 248s Selecting previously unselected package liblapack3:armhf. 248s Preparing to unpack .../04-liblapack3_3.12.0-3build2_armhf.deb ... 248s Unpacking liblapack3:armhf (3.12.0-3build2) ... 248s Selecting previously unselected package libpython3.13-stdlib:armhf. 248s Preparing to unpack .../05-libpython3.13-stdlib_3.13.0-2_armhf.deb ... 248s Unpacking libpython3.13-stdlib:armhf (3.13.0-2) ... 249s Selecting previously unselected package python3.13. 249s Preparing to unpack .../06-python3.13_3.13.0-2_armhf.deb ... 249s Unpacking python3.13 (3.13.0-2) ... 249s Selecting previously unselected package python3-all. 249s Preparing to unpack .../07-python3-all_3.12.7-1_armhf.deb ... 249s Unpacking python3-all (3.12.7-1) ... 249s Selecting previously unselected package python3-numpy. 249s Preparing to unpack .../08-python3-numpy_1%3a1.26.4+ds-11build1_armhf.deb ... 249s Unpacking python3-numpy (1:1.26.4+ds-11build1) ... 249s Selecting previously unselected package python3-mdp. 249s Preparing to unpack .../09-python3-mdp_3.6-8_all.deb ... 249s Unpacking python3-mdp (3.6-8) ... 249s Selecting previously unselected package autopkgtest-satdep. 249s Preparing to unpack .../10-1-autopkgtest-satdep.deb ... 249s Unpacking autopkgtest-satdep (0) ... 249s Setting up libpython3.13-minimal:armhf (3.13.0-2) ... 249s Setting up libblas3:armhf (3.12.0-3build2) ... 249s update-alternatives: using /usr/lib/arm-linux-gnueabihf/blas/libblas.so.3 to provide /usr/lib/arm-linux-gnueabihf/libblas.so.3 (libblas.so.3-arm-linux-gnueabihf) in auto mode 249s Setting up libgfortran5:armhf (14.2.0-8ubuntu1) ... 249s Setting up python3.13-minimal (3.13.0-2) ... 250s Setting up libpython3.13-stdlib:armhf (3.13.0-2) ... 250s Setting up liblapack3:armhf (3.12.0-3build2) ... 250s update-alternatives: using /usr/lib/arm-linux-gnueabihf/lapack/liblapack.so.3 to provide /usr/lib/arm-linux-gnueabihf/liblapack.so.3 (liblapack.so.3-arm-linux-gnueabihf) in auto mode 250s Setting up python3.13 (3.13.0-2) ... 251s Setting up python3-all (3.12.7-1) ... 251s Setting up python3-numpy (1:1.26.4+ds-11build1) ... 255s Setting up python3-mdp (3.6-8) ... 255s /usr/lib/python3/dist-packages/mdp/linear_flows_online.py:355: SyntaxWarning: invalid escape sequence '\ ' 255s """A 'CircularOnlineFlow' is a cyclic sequence of online/non-trainable nodes that are trained and executed 255s /usr/lib/python3/dist-packages/mdp/nodes/isfa_nodes.py:88: SyntaxWarning: invalid escape sequence '\k' 255s """Initializes an object of type 'ISFANode' to perform 256s /usr/lib/python3/dist-packages/mdp/linear_flows_online.py:355: SyntaxWarning: invalid escape sequence '\ ' 256s """A 'CircularOnlineFlow' is a cyclic sequence of online/non-trainable nodes that are trained and executed 256s /usr/lib/python3/dist-packages/mdp/nodes/isfa_nodes.py:88: SyntaxWarning: invalid escape sequence '\k' 256s """Initializes an object of type 'ISFANode' to perform 256s Setting up autopkgtest-satdep (0) ... 256s Processing triggers for systemd (256.5-2ubuntu4) ... 256s Processing triggers for man-db (2.12.1-3) ... 256s Processing triggers for libc-bin (2.40-1ubuntu3) ... 269s (Reading database ... 61414 files and directories currently installed.) 269s Removing autopkgtest-satdep (0) ... 275s autopkgtest [18:11:01]: test autodep8-python3: set -e ; for py in $(py3versions -r 2>/dev/null) ; do cd "$AUTOPKGTEST_TMP" ; echo "Testing with $py:" ; $py -c "import mdp; print(mdp)" ; done 275s autopkgtest [18:11:01]: test autodep8-python3: [----------------------- 277s Testing with python3.13: 278s Traceback (most recent call last): 278s File "", line 1, in 278s import mdp; print(mdp) 278s ^^^^^^^^^^ 278s File "/usr/lib/python3/dist-packages/mdp/__init__.py", line 128, in 278s numx_rand, numx_version) = configuration.get_numx() 278s ~~~~~~~~~~~~~~~~~~~~~~^^ 278s File "/usr/lib/python3/dist-packages/mdp/configuration.py", line 329, in get_numx 278s raise ImportError('\n'.join(msg)) 278s ImportError: Could not import any of the numeric backends. 278s Import errors: 278s scipy: No module named 'scipy' 278s numpy: Error importing numpy: you should not try to import numpy from 278s its source directory; please exit the numpy source tree, and relaunch 278s your python interpreter from there. 278s sys.path: ['', '/usr/lib/python313.zip', '/usr/lib/python3.13', '/usr/lib/python3.13/lib-dynload', '/usr/local/lib/python3.13/dist-packages', '/usr/lib/python3/dist-packages'] 278s autopkgtest [18:11:04]: test autodep8-python3: -----------------------] 282s autodep8-python3 FAIL non-zero exit status 1 282s autopkgtest [18:11:08]: test autodep8-python3: - - - - - - - - - - results - - - - - - - - - - 286s autopkgtest [18:11:12]: @@@@@@@@@@@@@@@@@@@@ summary 286s run-unit-test SKIP Test lists explicitly supported architectures, but the current architecture armhf isn't listed. 286s run-unit-test SKIP Test lists explicitly supported architectures, but the current architecture armhf isn't listed. 286s autodep8-python3 FAIL non-zero exit status 1