0s autopkgtest [19:38:50]: starting date and time: 2025-02-15 19:38:50+0000 0s autopkgtest [19:38:50]: git checkout: 325255d2 Merge branch 'pin-any-arch' into 'ubuntu/production' 0s autopkgtest [19:38:50]: host juju-7f2275-prod-proposed-migration-environment-2; command line: /home/ubuntu/autopkgtest/runner/autopkgtest --output-dir /tmp/autopkgtest-work.ch2blrp2/out --timeout-copy=6000 --setup-commands /home/ubuntu/autopkgtest-cloud/worker-config-production/setup-canonical.sh --apt-pocket=proposed=src:glibc,src:iproute2,src:php-twig,src:postgresql-17,src:postgresql-common,src:roundcube --apt-upgrade cura-engine --timeout-short=300 --timeout-copy=20000 --timeout-build=20000 '--env=ADT_TEST_TRIGGERS=glibc/2.41-1ubuntu1 iproute2/6.13.0-1ubuntu1 php-twig/3.19.0-1 postgresql-17/17.3-2 postgresql-common/273 roundcube/1.6.10+dfsg-1' -- ssh -s /home/ubuntu/autopkgtest/ssh-setup/nova -- --flavor builder-cpu2-ram4-disk20 --security-groups autopkgtest-juju-7f2275-prod-proposed-migration-environment-2@bos03-28.secgroup --name adt-plucky-amd64-cura-engine-20250215-193850-juju-7f2275-prod-proposed-migration-environment-2-00d894ca-2f55-4f7a-93e5-ca7df66831f9 --image adt/ubuntu-plucky-amd64-server --keyname testbed-juju-7f2275-prod-proposed-migration-environment-2 --net-id=net_prod-proposed-migration-amd64 -e TERM=linux -e ''"'"'http_proxy=http://squid.internal:3128'"'"'' -e ''"'"'https_proxy=http://squid.internal:3128'"'"'' -e ''"'"'no_proxy=127.0.0.1,127.0.1.1,login.ubuntu.com,localhost,localdomain,novalocal,internal,archive.ubuntu.com,ports.ubuntu.com,security.ubuntu.com,ddebs.ubuntu.com,changelogs.ubuntu.com,keyserver.ubuntu.com,launchpadlibrarian.net,launchpadcontent.net,launchpad.net,10.24.0.0/24,keystone.ps5.canonical.com,objectstorage.prodstack5.canonical.com,radosgw.ps5.canonical.com'"'"'' --mirror=http://ftpmaster.internal/ubuntu/ 65s autopkgtest [19:39:55]: testbed dpkg architecture: amd64 66s autopkgtest [19:39:56]: testbed apt version: 2.9.28 66s autopkgtest [19:39:56]: @@@@@@@@@@@@@@@@@@@@ test bed setup 66s autopkgtest [19:39:56]: testbed release detected to be: None 67s autopkgtest [19:39:57]: updating testbed package index (apt update) 68s Get:1 http://ftpmaster.internal/ubuntu plucky-proposed InRelease [110 kB] 68s Hit:2 http://ftpmaster.internal/ubuntu plucky InRelease 68s Hit:3 http://ftpmaster.internal/ubuntu plucky-updates InRelease 68s Hit:4 http://ftpmaster.internal/ubuntu plucky-security InRelease 68s Get:5 http://ftpmaster.internal/ubuntu plucky-proposed/multiverse Sources [13.7 kB] 68s Get:6 http://ftpmaster.internal/ubuntu plucky-proposed/universe Sources [822 kB] 68s Get:7 http://ftpmaster.internal/ubuntu plucky-proposed/restricted Sources [3120 B] 68s Get:8 http://ftpmaster.internal/ubuntu plucky-proposed/main Sources [62.8 kB] 68s Get:9 http://ftpmaster.internal/ubuntu plucky-proposed/main i386 Packages [65.0 kB] 68s Get:10 http://ftpmaster.internal/ubuntu plucky-proposed/main amd64 Packages [82.9 kB] 68s Get:11 http://ftpmaster.internal/ubuntu plucky-proposed/restricted amd64 Packages [7984 B] 68s Get:12 http://ftpmaster.internal/ubuntu plucky-proposed/restricted i386 Packages [2412 B] 68s Get:13 http://ftpmaster.internal/ubuntu plucky-proposed/universe amd64 Packages [823 kB] 68s Get:14 http://ftpmaster.internal/ubuntu plucky-proposed/universe i386 Packages [287 kB] 69s Get:15 http://ftpmaster.internal/ubuntu plucky-proposed/multiverse amd64 Packages [10.6 kB] 69s Get:16 http://ftpmaster.internal/ubuntu plucky-proposed/multiverse i386 Packages [3520 B] 69s Fetched 2294 kB in 2s (1454 kB/s) 69s Reading package lists... 70s Reading package lists... 70s Building dependency tree... 70s Reading state information... 71s Calculating upgrade... 71s The following packages will be upgraded: 71s libtasn1-6 71s 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 71s Need to get 51.2 kB of archives. 71s After this operation, 22.5 kB of additional disk space will be used. 71s Get:1 http://ftpmaster.internal/ubuntu plucky/main amd64 libtasn1-6 amd64 4.20.0-2 [51.2 kB] 71s Fetched 51.2 kB in 0s (171 kB/s) 72s (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 108914 files and directories currently installed.) 72s Preparing to unpack .../libtasn1-6_4.20.0-2_amd64.deb ... 72s Unpacking libtasn1-6:amd64 (4.20.0-2) over (4.19.0-3build1) ... 72s Setting up libtasn1-6:amd64 (4.20.0-2) ... 72s Processing triggers for libc-bin (2.40-4ubuntu1) ... 72s Reading package lists... 72s Building dependency tree... 72s Reading state information... 72s 0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded. 72s autopkgtest [19:40:02]: upgrading testbed (apt dist-upgrade and autopurge) 73s Reading package lists... 73s Building dependency tree... 73s Reading state information... 73s Calculating upgrade...Starting pkgProblemResolver with broken count: 0 73s Starting 2 pkgProblemResolver with broken count: 0 73s Done 74s Entering ResolveByKeep 74s 74s The following packages will be upgraded: 74s iproute2 libc-bin libc-dev-bin libc6 libc6-dev locales 75s 6 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 75s Need to get 11.8 MB of archives. 75s After this operation, 746 kB of additional disk space will be used. 75s Get:1 http://ftpmaster.internal/ubuntu plucky-proposed/main amd64 libc-dev-bin amd64 2.41-1ubuntu1 [24.7 kB] 75s Get:2 http://ftpmaster.internal/ubuntu plucky-proposed/main amd64 libc6-dev amd64 2.41-1ubuntu1 [2182 kB] 75s Get:3 http://ftpmaster.internal/ubuntu plucky-proposed/main amd64 locales all 2.41-1ubuntu1 [4246 kB] 75s Get:4 http://ftpmaster.internal/ubuntu plucky-proposed/main amd64 libc6 amd64 2.41-1ubuntu1 [3327 kB] 75s Get:5 http://ftpmaster.internal/ubuntu plucky-proposed/main amd64 libc-bin amd64 2.41-1ubuntu1 [701 kB] 75s Get:6 http://ftpmaster.internal/ubuntu plucky-proposed/main amd64 iproute2 amd64 6.13.0-1ubuntu1 [1277 kB] 76s Preconfiguring packages ... 76s Fetched 11.8 MB in 1s (8994 kB/s) 76s (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 108914 files and directories currently installed.) 76s Preparing to unpack .../libc-dev-bin_2.41-1ubuntu1_amd64.deb ... 76s Unpacking libc-dev-bin (2.41-1ubuntu1) over (2.40-4ubuntu1) ... 76s Preparing to unpack .../libc6-dev_2.41-1ubuntu1_amd64.deb ... 76s Unpacking libc6-dev:amd64 (2.41-1ubuntu1) over (2.40-4ubuntu1) ... 76s Preparing to unpack .../locales_2.41-1ubuntu1_all.deb ... 76s Unpacking locales (2.41-1ubuntu1) over (2.40-4ubuntu1) ... 76s Preparing to unpack .../libc6_2.41-1ubuntu1_amd64.deb ... 76s Checking for services that may need to be restarted... 76s Checking init scripts... 76s Checking for services that may need to be restarted... 76s Checking init scripts... 76s Stopping some services possibly affected by the upgrade (will be restarted later): 76s cron: stopping...done. 76s 76s Unpacking libc6:amd64 (2.41-1ubuntu1) over (2.40-4ubuntu1) ... 77s Setting up libc6:amd64 (2.41-1ubuntu1) ... 77s Checking for services that may need to be restarted... 77s Checking init scripts... 77s Restarting services possibly affected by the upgrade: 77s cron: restarting...done. 77s 77s Services restarted successfully. 77s (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 108915 files and directories currently installed.) 77s Preparing to unpack .../libc-bin_2.41-1ubuntu1_amd64.deb ... 77s Unpacking libc-bin (2.41-1ubuntu1) over (2.40-4ubuntu1) ... 77s Setting up libc-bin (2.41-1ubuntu1) ... 77s (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 108915 files and directories currently installed.) 77s Preparing to unpack .../iproute2_6.13.0-1ubuntu1_amd64.deb ... 77s Unpacking iproute2 (6.13.0-1ubuntu1) over (6.10.0-2ubuntu1) ... 77s Setting up iproute2 (6.13.0-1ubuntu1) ... 77s Setting up locales (2.41-1ubuntu1) ... 77s Installing new version of config file /etc/locale.alias ... 78s Generating locales (this might take a while)... 79s en_US.UTF-8... done 79s Generation complete. 79s Setting up libc-dev-bin (2.41-1ubuntu1) ... 79s Setting up libc6-dev:amd64 (2.41-1ubuntu1) ... 79s Processing triggers for man-db (2.13.0-1) ... 81s Processing triggers for systemd (257.2-3ubuntu1) ... 81s Reading package lists... 82s Building dependency tree... 82s Reading state information... 82s Starting pkgProblemResolver with broken count: 0 82s Starting 2 pkgProblemResolver with broken count: 0 82s Done 82s 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 85s autopkgtest [19:40:15]: testbed running kernel: Linux 6.12.0-15-generic #15-Ubuntu SMP PREEMPT_DYNAMIC Tue Feb 4 16:02:16 UTC 2025 85s autopkgtest [19:40:15]: @@@@@@@@@@@@@@@@@@@@ apt-source cura-engine 87s Get:1 http://ftpmaster.internal/ubuntu plucky/universe cura-engine 1:5.0.0-4ubuntu1 (dsc) [2309 B] 87s Get:2 http://ftpmaster.internal/ubuntu plucky/universe cura-engine 1:5.0.0-4ubuntu1 (tar) [1788 kB] 87s Get:3 http://ftpmaster.internal/ubuntu plucky/universe cura-engine 1:5.0.0-4ubuntu1 (diff) [68.5 kB] 87s gpgv: Signature made Wed Jul 3 13:49:57 2024 UTC 87s gpgv: using RSA key 25E3FF2D7F469DBE7D0D4E50AFCFEC8E669CE1C2 87s gpgv: Can't check signature: No public key 87s dpkg-source: warning: cannot verify inline signature for ./cura-engine_5.0.0-4ubuntu1.dsc: no acceptable signature found 87s autopkgtest [19:40:17]: testing package cura-engine version 1:5.0.0-4ubuntu1 88s autopkgtest [19:40:18]: build not needed 89s autopkgtest [19:40:19]: test test-command-line: preparing testbed 89s Reading package lists... 90s Building dependency tree... 90s Reading state information... 90s Starting pkgProblemResolver with broken count: 0 90s Starting 2 pkgProblemResolver with broken count: 0 90s Done 90s The following NEW packages will be installed: 90s cura-engine libarcus5 libgomp1 libpolyclipping22 libprotobuf32t64 90s 0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. 90s Need to get 2558 kB of archives. 90s After this operation, 7287 kB of additional disk space will be used. 90s Get:1 http://ftpmaster.internal/ubuntu plucky/main amd64 libprotobuf32t64 amd64 3.21.12-10build1 [956 kB] 91s Get:2 http://ftpmaster.internal/ubuntu plucky/universe amd64 libarcus5 amd64 5.0.0-5build3 [32.9 kB] 91s Get:3 http://ftpmaster.internal/ubuntu plucky/main amd64 libgomp1 amd64 14.2.0-17ubuntu1 [148 kB] 91s Get:4 http://ftpmaster.internal/ubuntu plucky/universe amd64 libpolyclipping22 amd64 6.4.2-8 [49.1 kB] 91s Get:5 http://ftpmaster.internal/ubuntu plucky/universe amd64 cura-engine amd64 1:5.0.0-4ubuntu1 [1372 kB] 91s Fetched 2558 kB in 1s (3598 kB/s) 91s Selecting previously unselected package libprotobuf32t64:amd64. 91s (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 108916 files and directories currently installed.) 91s Preparing to unpack .../libprotobuf32t64_3.21.12-10build1_amd64.deb ... 91s Unpacking libprotobuf32t64:amd64 (3.21.12-10build1) ... 91s Selecting previously unselected package libarcus5:amd64. 91s Preparing to unpack .../libarcus5_5.0.0-5build3_amd64.deb ... 91s Unpacking libarcus5:amd64 (5.0.0-5build3) ... 91s Selecting previously unselected package libgomp1:amd64. 91s Preparing to unpack .../libgomp1_14.2.0-17ubuntu1_amd64.deb ... 91s Unpacking libgomp1:amd64 (14.2.0-17ubuntu1) ... 91s Selecting previously unselected package libpolyclipping22:amd64. 91s Preparing to unpack .../libpolyclipping22_6.4.2-8_amd64.deb ... 91s Unpacking libpolyclipping22:amd64 (6.4.2-8) ... 91s Selecting previously unselected package cura-engine. 91s Preparing to unpack .../cura-engine_1%3a5.0.0-4ubuntu1_amd64.deb ... 91s Unpacking cura-engine (1:5.0.0-4ubuntu1) ... 91s Setting up libpolyclipping22:amd64 (6.4.2-8) ... 91s Setting up libprotobuf32t64:amd64 (3.21.12-10build1) ... 91s Setting up libarcus5:amd64 (5.0.0-5build3) ... 91s Setting up libgomp1:amd64 (14.2.0-17ubuntu1) ... 91s Setting up cura-engine (1:5.0.0-4ubuntu1) ... 91s Processing triggers for man-db (2.13.0-1) ... 92s Processing triggers for libc-bin (2.41-1ubuntu1) ... 93s autopkgtest [19:40:23]: test test-command-line: [----------------------- 93s + CuraEngine slice -j debian/tests/fdmprinter.def.json -l tests/testModel.stl -o /tmp/autopkgtest.XZqLA7/autopkgtest_tmp/foo.gcode 93s 93s Cura_SteamEngine version 5.0.0 93s Copyright (C) 2022 Ultimaker 93s 93s This program is free software: you can redistribute it and/or modify 93s it under the terms of the GNU Affero General Public License as published by 93s the Free Software Foundation, either version 3 of the License, or 93s (at your option) any later version. 93s 93s This program is distributed in the hope that it will be useful, 93s but WITHOUT ANY WARRANTY; without even the implied warranty of 93s MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 93s GNU Affero General Public License for more details. 93s 93s You should have received a copy of the GNU Affero General Public License 93s along with this program. If not, see . 93s [WARNING] Unrecognized data type in JSON setting machine_disallowed_areas 93s [WARNING] Unrecognized data type in JSON setting nozzle_disallowed_areas 93s [WARNING] Unrecognized data type in JSON setting machine_head_with_fans_polygon 93s [WARNING] -s mesh_position_z="0" -s raft_remove_inside_corners="false" -s wipe_repeat_count="5" -s wipe_brush_pos_x="100" -s wipe_hop_amount="1" -s wipe_hop_enable="true" -s wipe_pause="0" -s wipe_retraction_extra_prime_amount="0" -s clean_between_layers="false" -s bridge_skin_material_flow_3="110" -s bridge_skin_material_flow_2="100" -s bridge_skin_speed_2="25" -s bridge_sparse_infill_max_density="0" -s bridge_settings_enabled="false" -s adaptive_layer_height_threshold="0.2" -s adaptive_layer_height_variation_step="0.01" -s adaptive_layer_height_variation="0.1" -s adaptive_layer_height_enabled="false" -s wireframe_roof_drag_along="0.8" -s wireframe_drag_along="0.6" -s wireframe_fall_down="0.5" -s wireframe_flow_connection="100" -s wireframe_printspeed_flat="5" -s wireframe_printspeed_bottom="5" -s wireframe_roof_inset="3" -s wireframe_height="3" -s flow_rate_extrusion_offset_factor="100" -s flow_rate_max_extrusion_offset="0" -s magic_fuzzy_skin_outside_only="false" -s magic_fuzzy_skin_enabled="false" -s support_conical_enabled="false" -s cross_infill_density_image="" -s cross_infill_pocket_size="2" -s coasting_speed="90" -s max_extrusion_before_wipe="10" -s coasting_min_volume="0.8" -s coasting_volume="0.064" -s draft_shield_height="10" -s conical_overhang_angle="50" -s draft_shield_height_limitation="full" -s support_skip_some_zags="false" -s material_flow_dependent_temperature="false" -s bridge_wall_coast="100" -s slicing_tolerance="middle" -s relative_extrusion="false" -s magic_mesh_surface_mode="normal" -s magic_fuzzy_skin_point_dist="0.8" -s mold_roof_height="0.5" -s magic_spiralize="false" -s cutting_mesh="false" -s infill_mesh="false" -s print_sequence="all_at_once" -s meshfix_maximum_extrusion_area_deviation="2000" -s meshfix_maximum_resolution="0.5" -s alternate_carve_order="true" -s carve_multiple_volumes="true" -s meshfix_union_all_remove_holes="false" -s meshfix_union_all="true" -s mold_enabled="false" -s switch_extruder_retraction_amount="20" -s wipe_retraction_enable="true" -s ooze_shield_enabled="false" -s prime_tower_enable="false" -s raft_base_fan_speed="0" -s raft_base_jerk="20" -s raft_surface_acceleration="3000" -s raft_surface_speed="20" -s raft_base_line_width="0.8" -s mold_width="5" -s raft_base_thickness="0.3" -s raft_interface_line_spacing="0.9" -s raft_interface_line_width="0.7" -s raft_interface_thickness="0.15" -s raft_interface_layers="1" -s raft_surface_line_width="0.4" -s raft_surface_thickness="0.1" -s raft_margin="15" -s wireframe_strategy="compensate" -s wireframe_flow_flat="100" -s skirt_brim_minimal_length="250" -s skirt_gap="3" -s wireframe_roof_outer_delay="0.2" -s skirt_line_count="1" -s raft_surface_extruder_nr="0" -s raft_interface_extruder_nr="0" -s raft_base_extruder_nr="0" -s skirt_brim_extruder_nr="0" -s prime_blob_enable="false" -s support_meshes_present="false" -s prime_tower_position_y="200" -s support_mesh_drop_down="true" -s bridge_skin_density_2="75" -s support_tower_maximum_supported_diameter="3" -s support_tower_diameter="3" -s support_use_towers="true" -s support_fan_enable="false" -s support_roof_offset="0" -s bridge_wall_speed="15" -s minimum_roof_area="1" -s raft_base_wall_count="1" -s support_bottom_pattern="concentric" -s bridge_wall_material_flow="50" -s support_bottom_enable="false" -s support_roof_enable="false" -s minimum_support_area="0" -s gradual_support_infill_steps="0" -s support_offset="0" -s support_bottom_stair_step_min_slope="10" -s support_bottom_stair_step_width="5" -s small_feature_speed_factor_0="50" -s prime_tower_size="20" -s support_bottom_stair_step_height="0.3" -s support_xy_overrides_z="z_overrides_xy" -s prime_tower_brim_enable="false" -s support_xy_distance="0.7" -s support_bottom_distance="0.1" -s support_top_distance="0.1" -s support_infill_angles="[ ]" -s wireframe_printspeed_up="5" -s raft_base_acceleration="3000" -s support_pattern="zigzag" -s support_angle="50" -s wireframe_nozzle_clearance="1" -s support_type="everywhere" -s support_tree_branch_diameter_angle="5" -s bridge_fan_speed_2="0" -s support_initial_layer_line_distance="2.66" -s support_tree_branch_diameter="2" -s support_structure="normal" -s support_roof_extruder_nr="0" -s support_extruder_nr_layer_0="0" -s support_infill_extruder_nr="0" -s cool_lift_head="false" -s cool_min_speed="10" -s cool_min_layer_time="5" -s roofing_angles="[ ]" -s cool_fan_full_layer="2" -s raft_base_line_spacing="1.6" -s support_wall_count="1" -s cool_fan_speed_0="0" -s cool_min_layer_time_fan_speed_max="10" -s wireframe_top_jump="0.6" -s cool_fan_speed_min="100" -s cool_fan_enabled="true" -s retraction_hop_after_extruder_switch_height="1" -s retraction_hop_after_extruder_switch="true" -s wipe_hop_speed="10" -s top_skin_expand_distance="1" -s acceleration_ironing="3000" -s prime_tower_min_volume="6" -s support_tree_branch_distance="1" -s material_end_of_filament_purge_speed="0.5" -s xy_offset="0" -s prime_tower_wipe_enabled="true" -s speed_support_infill="60" -s wireframe_printspeed_down="5" -s connect_skin_polygons="false" -s material_break_speed="25" -s top_bottom_pattern="lines" -s jerk_roofing="20" -s limit_support_retractions="true" -s top_bottom_extruder_nr="-1" -s skin_monotonic="false" -s roofing_layer_count="0" -s wall_distribution_count="1" -s z_seam_relative="false" -s hole_xy_offset="0" -s z_seam_x="100" -s raft_interface_fan_speed="0" -s support_tower_roof_angle="65" -s material_bed_temp_wait="true" -s meshfix_maximum_travel_resolution="1" -s xy_offset_layer_0="0" -s min_bead_width="0.2" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s mesh_position_x="0" -s meshfix_extensive_stitching="false" -s ironing_pattern="zigzag" -s meshfix_maximum_deviation="0.025" -s support_infill_sparse_thickness="0.1" -s layer_start_x="0" -s fill_outline_gaps="true" -s material_final_print_temperature="195" -s wall_add_middle_threshold="75" -s support_brim_line_count="20" -s alternate_extra_perimeter="false" -s wall_transition_angle="10" -s ironing_only_highest_layer="false" -s machine_feeder_wheel_diameter="10" -s gradual_support_infill_step_height="1" -s machine_steps_per_mm_e="1600" -s meshfix_keep_open_polygons="false" -s wall_transition_filter_deviation="0.1" -s bridge_skin_density_3="80" -s machine_max_acceleration_x="9000" -s z_seam_corner="z_seam_corner_inner" -s support_tree_angle="40" -s skin_angles="[ ]" -s wall_overhang_angle="90" -s z_seam_y="100" -s inset_direction="outside_in" -s machine_show_variants="false" -s wall_transition_filter_distance="100" -s wipe_retraction_retract_speed="3" -s layer_height="0.1" -s bridge_fan_speed="100" -s bridge_skin_speed="15" -s machine_extruders_shared_nozzle_initial_retraction="0" -s wall_line_count="2" -s wall_0_extruder_nr="-1" -s infill_offset_x="0" -s support_roof_line_width="0.4" -s wall_transition_length="0.4" -s infill_line_distance="2" -s skirt_brim_line_width="0.4" -s wall_line_width_x="0.4" -s minimum_polygon_circumference="1" -s roofing_extruder_nr="-1" -s machine_extruders_share_heater="false" -s min_feature_size="0.1" -s gantry_height="1e+11" -s wall_line_width_0="0.4" -s lightning_infill_straightening_angle="40" -s machine_min_cool_heat_time_window="50" -s machine_max_feedrate_x="2.99792e+11" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s machine_nozzle_temp_enabled="true" -s raft_surface_jerk="20" -s machine_heated_bed="false" -s wireframe_bottom_delay="0" -s wall_x_extruder_nr="-1" -s retraction_hop_enabled="false" -s prime_tower_line_width="0.4" -s skin_material_flow="100" -s multiple_mesh_overlap="0.15" -s machine_nozzle_expansion_angle="45" -s machine_nozzle_head_distance="3" -s adhesion_type="brim" -s speed_z_hop="10" -s acceleration_support_roof="3000" -s wipe_retraction_prime_speed="2" -s initial_bottom_layers="6" -s machine_acceleration="4000" -s material_bed_temperature_layer_0="60" -s support_connect_zigzags="true" -s support_line_width="0.4" -s bridge_skin_density="100" -s skin_outline_count="1" -s wireframe_flat_delay="0.1" -s wireframe_enabled="false" -s support_roof_line_distance="0.4" -s zig_zaggify_support="false" -s machine_extruder_count="1" -s material_print_temp_prepend="true" -s cool_fan_speed_max="100" -s infill_offset_y="0" -s wipe_retraction_amount="1" -s jerk_ironing="20" -s machine_max_feedrate_e="2.99792e+11" -s infill_enable_travel_optimization="false" -s speed_ironing="20" -s gradual_infill_steps="0" -s speed_support_roof="40" -s travel_retract_before_outer_wall="false" -s jerk_wall_0="20" -s machine_nozzle_heat_up_speed="2" -s machine_endstop_positive_direction_y="false" -s bottom_skin_preshrink="1" -s wireframe_roof_fall_down="2" -s switch_extruder_prime_speed="20" -s speed_infill="60" -s support_conical_min_width="5" -s retraction_combing="all" -s material_guid="" -s support_roof_angles="[ ]" -s support_roof_pattern="concentric" -s retraction_combing_max_distance="0" -s magic_fuzzy_skin_thickness="0.3" -s conical_overhang_enabled="false" -s remove_empty_first_layers="true" -s machine_minimum_feedrate="0" -s skin_no_small_gaps_heuristic="false" -s infill_extruder_nr="-1" -s material_maximum_park_duration="300" -s mesh_position_y="0" -s machine_heat_zone_length="16" -s switch_extruder_retraction_speed="20" -s machine_max_jerk_z="0.4" -s machine_end_gcode="M104 S0 93s M140 S0 93s ;Retract the filament 93s G92 E1 93s G1 E-1 F300 93s G28 X0 Y0 93s M84" -s mold_angle="40" -s raft_airgap="0.3" -s material_no_load_move_factor="0.94086" -s ironing_monotonic="false" -s top_layers="8" -s material_bed_temp_prepend="true" -s jerk_travel="30" -s roofing_monotonic="false" -s support_xy_distance_overhang="0.2" -s machine_center_is_zero="false" -s support_zag_skip_count="5" -s material_diameter="2.85" -s brim_outside_only="true" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s material_print_temp_wait="true" -s bridge_skin_speed_3="15" -s machine_steps_per_mm_x="50" -s minimum_bottom_area="1" -s ironing_flow="10" -s machine_always_write_active_tool="false" -s wireframe_straight_before_down="20" -s jerk_wall_x="20" -s ironing_inset="0.35" -s infill_support_angle="40" -s raft_interface_speed="15" -s jerk_support_infill="20" -s extruders_enabled_count="1" -s machine_height="100" -s support_join_distance="2" -s machine_buildplate_type="glass" -s retraction_extra_prime_amount="0" -s machine_start_gcode="G28 ;Home 93s G1 Z15.0 F6000 ;Move the platform down 15mm 93s ;Prime the extruder 93s G92 E0 93s G1 F200 E3 93s G92 E0" -s layer_height_0="0.3" -s wireframe_up_half_speed="0.3" -s machine_name="Unknown" -s machine_nozzle_id="unknown" -s raft_base_speed="15" -s jerk_travel_layer_0="20" -s bottom_skin_expand_distance="1" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s raft_smoothing="5" -s machine_width="100" -s raft_surface_line_spacing="0.4" -s brim_line_count="20" -s retraction_retract_speed="25" -s layer_start_y="0" -s cross_support_density_image="" -s support_mesh="false" -s machine_firmware_retract="false" -s machine_max_feedrate_y="2.99792e+11" -s infill_sparse_thickness="0.1" -s machine_steps_per_mm_z="50" -s draft_shield_dist="10" -s machine_extruders_share_nozzle="false" -s machine_shape="rectangular" -s speed_travel="120" -s support_brim_enable="false" -s travel_avoid_other_parts="true" -s support_interface_skip_height="0.3" -s machine_endstop_positive_direction_z="true" -s skin_line_width="0.4" -s machine_nozzle_size="0.4" -s roofing_material_flow="100" -s acceleration_infill="3000" -s machine_use_extruder_offset_to_offset_coords="true" -s gradual_infill_step_height="1.5" -s roofing_pattern="lines" -s top_skin_preshrink="1" -s extruder_prime_pos_abs="false" -s machine_max_feedrate_z="2.99792e+11" -s material_break_temperature="50" -s wireframe_top_delay="0" -s build_volume_temperature="0" -s extruder_prime_pos_x="0" -s acceleration_topbottom="3000" -s machine_max_acceleration_z="100" -s optimize_wall_printing_order="false" -s machine_max_acceleration_y="9000" -s wall_0_inset="0" -s support_bottom_extruder_nr="0" -s machine_max_acceleration_e="10000" -s acceleration_wall_x="3000" -s machine_max_jerk_xy="20" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s infill_wall_line_count="0" -s ironing_enabled="false" -s material_alternate_walls="false" -s material_break_preparation_temperature="50" -s wall_overhang_speed_factor="100" -s machine_max_jerk_e="5" -s support_roof_height="1" -s material_flush_purge_speed="0.5" -s wall_split_middle_threshold="50" -s bridge_skin_material_flow="60" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s machine_steps_per_mm_y="50" -s acceleration_travel_layer_0="3000" -s machine_endstop_positive_direction_x="false" -s infill_pattern="grid" -s material_bed_temperature="60" -s acceleration_travel="5000" -s support_bottom_line_width="0.4" -s initial_layer_line_width_factor="100" -s zig_zaggify_infill="false" -s support_bottom_line_distance="0.4" -s support_enable="false" -s machine_heated_build_volume="false" -s extruder_prime_pos_z="0" -s material_anti_ooze_retracted_position="-4" -s raft_surface_fan_speed="0" -s wall_0_wipe_dist="0.2" -s material_break_preparation_speed="2" -s material_anti_ooze_retraction_speed="5" -s infill_angles="[ ]" -s machine_depth="100" -s acceleration_skirt_brim="3000" -s infill_randomize_start_location="false" -s infill_multiplier="1" -s small_feature_speed_factor="50" -s skin_overlap_mm="0.02" -s sub_div_rad_add="0.4" -s brim_replaces_support="true" -s default_material_print_temperature="210" -s infill_overlap_mm="0.04" -s support_bottom_material_flow="100" -s support_bottom_height="1" -s infill_wipe_dist="0.04" -s infill_before_walls="true" -s support_conical_angle="30" -s support_tree_collision_resolution="0.4" -s material_flush_purge_length="60" -s speed_equalize_flow_width_factor="100" -s ooze_shield_angle="60" -s infill_support_enabled="false" -s ironing_line_spacing="0.1" -s skin_edge_support_layers="4" -s acceleration_prime_tower="3000" -s lightning_infill_overhang_angle="40" -s bridge_enable_more_layers="true" -s lightning_infill_prune_angle="40" -s machine_scale_fan_speed_zero_to_one="false" -s jerk_print_layer_0="20" -s material_print_temperature="210" -s conical_overhang_hole_size="0" -s draft_shield_enabled="false" -s infill_material_flow="100" -s bottom_layers="6" -s material_print_temperature_layer_0="215" -s material_initial_print_temperature="200" -s machine_nozzle_cool_down_speed="2" -s material_standby_temperature="150" -s material_extrusion_cool_down_speed="0.7" -s skirt_brim_material_flow="100" -s acceleration_support_bottom="3000" -s anti_overhang_mesh="false" -s default_material_bed_temperature="60" -s acceleration_wall_0="3000" -s material_adhesion_tendency="10" -s material_surface_energy="100" -s speed_roofing="25" -s material_shrinkage_percentage_z="100" -s material_crystallinity="false" -s material_break_preparation_retracted_position="-16" -s retraction_amount="6.5" -s small_feature_max_length="0" -s material_break_retracted_position="-50" -s raft_surface_layers="2" -s speed_support_bottom="40" -s raft_interface_acceleration="3000" -s material_end_of_filament_purge_length="20" -s speed_travel_layer_0="60" -s extruder_prime_pos_y="0" -s wall_0_material_flow="100" -s prime_tower_position_x="200" -s acceleration_roofing="3000" -s wall_x_material_flow="100" -s bridge_skin_support_threshold="50" -s support_material_flow="100" -s infill_mesh_order="0" -s layer_0_z_overlap="0.22" -s support_roof_material_flow="100" -s raft_interface_jerk="20" -s support_supported_skin_fan_speed="100" -s top_bottom_pattern_0="lines" -s prime_tower_flow="100" -s roofing_line_width="0.4" -s retraction_hop_only_when_collides="false" -s material_flow_layer_0="100" -s switch_extruder_extra_prime_amount="0" -s speed_wall_0="30" -s ooze_shield_dist="2" -s support_line_distance="2.66" -s speed_wall_x="60" -s speed_topbottom="30" -s speed_prime_tower="60" -s speed_print_layer_0="30" -s skirt_brim_speed="30" -s bridge_wall_min_length="5" -s speed_slowdown_layers="2" -s support_bottom_offset="0" -s infill_line_width="0.4" -s travel_avoid_distance="0.625" -s smooth_spiralized_contours="true" -s brim_gap="0" -s acceleration_enabled="false" -s retraction_extrusion_window="4.5" -s acceleration_support_infill="3000" -s jerk_enabled="false" -s center_object="false" -s support_bottom_angles="[ ]" -s acceleration_print_layer_0="3000" -s connect_infill_polygons="true" -s jerk_topbottom="20" -s jerk_support_roof="20" -s coasting_enable="false" -s jerk_support_bottom="20" -s retraction_hop="1" -s jerk_prime_tower="20" -s jerk_skirt_brim="20" -s material_shrinkage_percentage_xy="100" -s retraction_enable="true" -s retract_at_layer_change="false" -s retraction_min_travel="1.5" -s jerk_infill="20" -s retraction_count_max="90" -s min_skin_width_for_expansion="0" -s travel_avoid_supports="false" -e0 -s material_diameter="2.85" -s extruder_prime_pos_y="0" -s machine_extruder_cooling_fan_number="0" -s extruder_prime_pos_z="0" -s extruder_nr="0" -s machine_nozzle_offset_y="0" -s machine_nozzle_id="unknown" -s machine_nozzle_offset_x="0" -s machine_extruder_start_code="" -s machine_extruder_start_pos_abs="false" -s extruder_prime_pos_x="0" -s machine_extruder_start_pos_x="0" -s machine_extruder_start_pos_y="0" -s machine_extruder_end_code="" -s machine_extruder_end_pos_x="0" -s machine_nozzle_size="0.4" -s machine_extruder_end_pos_abs="false" -s machine_extruder_end_pos_y="0" -g -e0 -l "0" -s material_diameter="2.85" -s extruder_prime_pos_y="0" -s machine_extruder_cooling_fan_number="0" -s extruder_prime_pos_z="0" -s extruder_nr="0" -s machine_nozzle_offset_y="0" -s machine_nozzle_id="unknown" -s machine_nozzle_offset_x="0" -s machine_extruder_start_code="" -s machine_extruder_start_pos_abs="false" -s extruder_prime_pos_x="0" -s machine_extruder_start_pos_x="0" -s machine_extruder_start_pos_y="0" -s machine_extruder_end_code="" -s machine_extruder_end_pos_x="0" -s machine_nozzle_size="0.4" -s machine_extruder_end_pos_abs="false" -s machine_extruder_end_pos_y="0" 94s autopkgtest [19:40:24]: test test-command-line: -----------------------] 94s autopkgtest [19:40:24]: test test-command-line: - - - - - - - - - - results - - - - - - - - - - 94s test-command-line PASS 95s autopkgtest [19:40:25]: @@@@@@@@@@@@@@@@@@@@ summary 95s test-command-line PASS 112s nova [W] Skipping flock for amd64 112s Creating nova instance adt-plucky-amd64-cura-engine-20250215-193850-juju-7f2275-prod-proposed-migration-environment-2-00d894ca-2f55-4f7a-93e5-ca7df66831f9 from image adt/ubuntu-plucky-amd64-server-20250215.img (UUID d1f7bb98-7df8-4026-816e-9f6798166d8b)... 112s nova [W] Timed out waiting for b88142dd-2069-4500-89bf-55f6b1e04125 to get deleted.